Tolerance representation scheme in solid model. Part I

U. Roy; M. D. Pollard; K. Mantooth; C. R. Liu

Tolerance representation scheme in solid model. Part I

U. Roy, M. D. Pollard, K. Mantooth, C. R. Liu

Research output: Contribution to conference › Paper › peer-review

Abstract

The major objective of this paper is to develop a front-end scheme necessary for interfacing the tolerance module with the solid model. This includes the development of (i) an efficient user interfacing system for inputing tolerance information, (ii) a suitable tolerancing data module (to be attached to the solid model), and (iii) an information retrieval system from the stored database for future tolerance analysis. This work has been developed with the help of the Quick Turnaround Cell (QTC) Design System) and TWIN Solid Model Package, developed at the Purdue Engineering Research Center (ERC).

Original language	English (US)
Pages	1-10
Number of pages	10
State	Published - 1989
Externally published	Yes
Event	Advances in Design Automation - 1989 - Montreal, Que, Can Duration: Sep 17 1989 → Sep 21 1989

Other

Other	Advances in Design Automation - 1989
City	Montreal, Que, Can
Period	9/17/89 → 9/21/89

ASJC Scopus subject areas

General Engineering

Cite this

@conference{fe66171c9ab24756b54092b26b7e742c,

title = "Tolerance representation scheme in solid model. Part I",

abstract = "The major objective of this paper is to develop a front-end scheme necessary for interfacing the tolerance module with the solid model. This includes the development of (i) an efficient user interfacing system for inputing tolerance information, (ii) a suitable tolerancing data module (to be attached to the solid model), and (iii) an information retrieval system from the stored database for future tolerance analysis. This work has been developed with the help of the Quick Turnaround Cell (QTC) Design System) and TWIN Solid Model Package, developed at the Purdue Engineering Research Center (ERC).",

author = "U. Roy and Pollard, {M. D.} and K. Mantooth and Liu, {C. R.}",

year = "1989",

language = "English (US)",

pages = "1--10",

note = "Advances in Design Automation - 1989 ; Conference date: 17-09-1989 Through 21-09-1989",

}

TY - CONF

T1 - Tolerance representation scheme in solid model. Part I

AU - Roy, U.

AU - Pollard, M. D.

AU - Mantooth, K.

AU - Liu, C. R.

PY - 1989

Y1 - 1989

N2 - The major objective of this paper is to develop a front-end scheme necessary for interfacing the tolerance module with the solid model. This includes the development of (i) an efficient user interfacing system for inputing tolerance information, (ii) a suitable tolerancing data module (to be attached to the solid model), and (iii) an information retrieval system from the stored database for future tolerance analysis. This work has been developed with the help of the Quick Turnaround Cell (QTC) Design System) and TWIN Solid Model Package, developed at the Purdue Engineering Research Center (ERC).

AB - The major objective of this paper is to develop a front-end scheme necessary for interfacing the tolerance module with the solid model. This includes the development of (i) an efficient user interfacing system for inputing tolerance information, (ii) a suitable tolerancing data module (to be attached to the solid model), and (iii) an information retrieval system from the stored database for future tolerance analysis. This work has been developed with the help of the Quick Turnaround Cell (QTC) Design System) and TWIN Solid Model Package, developed at the Purdue Engineering Research Center (ERC).

UR - http://www.scopus.com/inward/record.url?scp=0024910457&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0024910457&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:0024910457

SP - 1

EP - 10

T2 - Advances in Design Automation - 1989

Y2 - 17 September 1989 through 21 September 1989

ER -

Tolerance representation scheme in solid model. Part I

Abstract

Other

ASJC Scopus subject areas

Other files and links

Fingerprint

Cite this