Methane-based flame fuel cell using anode supported solid oxide fuel cells

Kang Wang, Pingying Zeng, Jeongmin Ahn

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Abstract

This work presents the performance of the flame fuel cell based on the anode-supported solid oxide fuel cell (AS-SOFC) with a methane flame, which serves not only as a fuel reformer but also as a heat source to sustain the fuel cell operation. The anode-supported SOFC showed an extraordinary fuel cell performance of 475 mW/cm2 by using a methane flame. The fuel cell performance was determined by fuel cell temperature and fuel concentration which varied with the equivalent ratio and methane flow rate.

Original languageEnglish (US)
Title of host publicationASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011
Pages55-58
Number of pages4
DOIs
StatePublished - Dec 1 2011
EventASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011 - Washington, DC, United States
Duration: Aug 7 2011Aug 10 2011

Publication series

NameASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011

Other

OtherASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011
CountryUnited States
CityWashington, DC
Period8/7/118/10/11

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Fuel Technology
  • Renewable Energy, Sustainability and the Environment

Fingerprint Dive into the research topics of 'Methane-based flame fuel cell using anode supported solid oxide fuel cells'. Together they form a unique fingerprint.

  • Cite this

    Wang, K., Zeng, P., & Ahn, J. (2011). Methane-based flame fuel cell using anode supported solid oxide fuel cells. In ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011 (pp. 55-58). (ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011). https://doi.org/10.1115/FuelCell2011-54170