Research output per year
Research output per year
- 50 - 83 out of 83 results
Search results
-
2005
Measurements and modeling of VOC emissions from a large wall assembly of typical wood-framed residential houses
Li, H., Zhang, J. S., Yang, M. & Salonvaara, M., 2005, In: ASHRAE Transactions. 111 PART 1, p. 210-217 8 p., 4761.Research output: Contribution to journal › Conference Article › peer-review
4 Scopus citations -
On Particle Image Velocimetry (PIV) measurements in the breathing zone of a thermal breathing manikin
Marr, D., Higuchi, H., Khan, T., Zhang, J. & Glauser, M., 2005, In: ASHRAE Transactions. 111 PART 2, p. 299-305 7 p., 4813.Research output: Contribution to journal › Conference Article › peer-review
30 Scopus citations -
Performance of air cleaners for removing multiple volatile organic compounds in indoor air
Chen, W., Zhang, J. S. & Zhang, Z., 2005, In: ASHRAE Transactions. 111 PART 1, p. 1101-1114 14 p., OR-05-17-2.Research output: Contribution to journal › Conference Article › peer-review
152 Scopus citations -
2003
A case study on educating engineers for geographically-dispersed design teams
Dannenhoffer, J. F., Ingraffea, A. R., Zehnder, A. T., Davidson, B. D. & Jones, S. L., 2003, In: American Society of Mechanical Engineers, Design Engineering Division (Publication) DE. 116, 1, p. 251-255 5 p.Research output: Contribution to journal › Conference Article › peer-review
1 Scopus citations -
Effects of environmental conditions on the sorption of VOCs on building materials - Part II: Model evaluation
Zhang, J., Zhang, J. S. & Chen, Q., 2003, In: ASHRAE Transactions. 109 PART 1, p. 167-178 12 p.Research output: Contribution to journal › Conference Article › peer-review
10 Scopus citations -
Facilitating effective, geographically distributed engineering design teams
Davidson, B., Dannenhoffer, J., Gay, G., Ingraffea, A., Jones, S., Lee, J. S., Stefanone, M. & Zehnder, A., 2003, In: Proceedings - Frontiers in Education Conference. 2, p. F4F13-F4F18Research output: Contribution to journal › Conference Article › peer-review
-
On the use of advanced IT tools to facilitate effective, geographically distributed student design teams
Davidson, B., Dannenhoffer, J., Gay, G., Ingraffea, A., Jones, S., Lee, J. S., Stefanone, M. & Zehnder, A., 2003, In: ASEE Annual Conference Proceedings. p. 7935-7940 6 p.Research output: Contribution to journal › Conference Article › peer-review
1 Scopus citations -
Performance test results for a large coupled indoor/outdoor environmental simulator (C-I/O-ES)
Herrmann, T. J., Zhang., J. S., Zhang., Z., Smith, J., Gao, X., Li, H., Chen, W. & Wang, S., 2003, In: ASHRAE Transactions. 109 PART 2, p. 503-516 14 p.Research output: Contribution to journal › Conference Article › peer-review
11 Scopus citations -
The debonding of viscoelastic fiber composites in antiplane shear
Levy, A. J. & Xie, M., 2003, In: American Society of Mechanical Engineers, Applied Mechanics Division, AMD. 254, p. 85-91 7 p.Research output: Contribution to journal › Conference Article › peer-review
-
2002
An enhanced multizone model and its application to optimum placement of CBW sensors: Discussion
Khalifa, H. E., Spitler, J. D., Hirnikel, D. & Becker, B., 2002, In: ASHRAE Transactions. 108 PART 2, p. 825-826 2 p.Research output: Contribution to journal › Conference Article › peer-review
-
Collaborative distance design of aerospace structures
Davidson, B., Davidson, R., Gay, G., Ingraffea, A., Jones, S., Miller, M., Nozick, L., Zehnder, A., Sheckler, R. & Rath, C., 2002, In: Proceedings - Frontiers in Education Conference. 2, p. F4F/20Research output: Contribution to journal › Conference Article › peer-review
1 Scopus citations -
Distance design collaboration through an advanced interactive discovery environment
Davidson, B., Davidson, R., Gay, G., Ingraffea, A., Miller, M., Nozick, L., Zehnder, A., Sheckler, R. & Rath, C., 2002, In: ASEE Annual Conference Proceedings. p. 12265-12272 8 p.Research output: Contribution to journal › Conference Article › peer-review
2 Scopus citations -
Effects of environmental conditions on the VOC sorption by building materials - Part I: Experimental results
Zhang, J., Zhang, J. & Chen, Q., 2002, In: ASHRAE Transactions. 108 PART 2, p. 273-282 10 p.Research output: Contribution to journal › Conference Article › peer-review
24 Scopus citations -
Multizone modeling approaches to contaminant-based design: Discussion
Khalifa, H. E., Schoen, L. & Hirnikel, D., 2002, In: ASHRAE Transactions. 108 PART 2, p. 810 1 p.Research output: Contribution to journal › Conference Article › peer-review
2 Scopus citations -
2001
A combined tension-bending test for assessing mixed-mode delamination growth predictions
Gratz, K. R. & Davidson, B. D., 2001, In: Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 3, p. 1994-2004 11 p.Research output: Contribution to journal › Conference Article › peer-review
-
Correlations between the internal diffusion and equilibrium partition coefficients of volatile organic compounds (VOCs) in building materials and the VOC properties
Bodalal, A., Plett, E. G., Zhang, J. S. & Shaw, C. Y., 2001, In: ASHRAE Transactions. 107 PART. 1, p. 789-800 12 p.Research output: Contribution to journal › Conference Article › peer-review
28 Scopus citations -
1998
Practical use of 3D inverse method for compressor blade design
Damle, S., Dang, T., Stringham, J. & Razinsky, E., 1998, In: American Society of Mechanical Engineers (Paper). GTResearch output: Contribution to journal › Conference Article › peer-review
5 Scopus citations -
1997
Design modification of Rotor 67 by 3D inverse method - inviscid-flow limit
Dang, T. Q., Nerurkar, A. C. & Reddy, D. R., 1997, In: American Society of Mechanical Engineers (Paper).Research output: Contribution to journal › Conference Article › peer-review
9 Scopus citations -
1996
Development of a feature based rapid design environment
Roy, U. & Panayil, D., 1996, In: ASEE Annual Conference Proceedings. p. 1127-1132 6 p.Research output: Contribution to journal › Conference Article › peer-review
-
1995
Effect of unsteady wake passing frequency on boundary layer transition, experimental investigation and wavelet analysis
Schobeiri, M. T., Read, K. & Lewalle, J., 1995, In: American Society of Mechanical Engineers (Paper). p. 19 19 p.Research output: Contribution to journal › Conference Article › peer-review
11 Scopus citations -
Prediction of energy release rate for edge delamination using a crack tip element approach
Davidson, B. D., Oct 1995, In: ASTM Special Technical Publication. 1230, p. 155-175 21 p.Research output: Contribution to journal › Conference Article › peer-review
27 Scopus citations -
Throughflow method for turbomachines applicable for all flow regimes
Damle, S. V., Dang, T. Q. & Reddy, D. R., 1995, In: American Society of Mechanical Engineers (Paper). p. 10 10 p.Research output: Contribution to journal › Conference Article › peer-review
-
1994
Bifurcation phenomena at a circular interface and related problems
Levy, A. J., 1994, In: American Society of Mechanical Engineers, Applied Mechanics Division, AMD. 183, p. 315-326 12 p.Research output: Contribution to journal › Conference Article › peer-review
-
Design method for turbomachine blades with finite thickness by the circulation method
Jiang, J. & Dang, T., 1994, In: American Society of Mechanical Engineers (Paper). p. 1-10 10 p.Research output: Contribution to journal › Conference Article › peer-review
1 Scopus citations -
Effect of an open hole on the compression fatigue behavior of composite tubes
Davidson, B. D. & Petra, J. M., 1994, In: Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 2, p. 792-802 11 p.Research output: Contribution to journal › Conference Article › peer-review
-
Inverse method for turbomachine blades using existing time-marching techniques
Dang, T. & Isgro, V., 1994, In: American Society of Mechanical Engineers (Paper). p. 1-12 12 p.Research output: Contribution to journal › Conference Article › peer-review
2 Scopus citations -
Prediction of delamination growth in laminated structures
Davidson, B. D., 1994, In: American Society of Mechanical Engineers, Applied Mechanics Division, AMD. 196, p. 43-65 23 p.Research output: Contribution to journal › Conference Article › peer-review
19 Scopus citations -
1993
Effect of impact damage on the compression fatigue behavior of composite tubes
Krafchak, T. M., Petra, J. M., Davidson, B. D. & Chen, G. S., 1993, In: Collection of Technical Papers - AIAA/ASME Structures, Structural Dynamics and Materials Conference. pt 2, p. 859-866 8 p.Research output: Contribution to journal › Conference Article › peer-review
3 Scopus citations -
Mixed mode energy release rate determination for delamination buckling using a crack tip element
Davidson, B. D. & Krafchak, T. M., 1993, In: Collection of Technical Papers - AIAA/ASME Structures, Structural Dynamics and Materials Conference. pt 3, p. 1302-1309 8 p.Research output: Contribution to journal › Conference Article › peer-review
1 Scopus citations -
Preliminary design of laminated composite plates using an automated system
Ludden, C., Roy, U. & Davidson, B., Mar 23 1993, In: Proceedings of SPIE - The International Society for Optical Engineering. 1963, p. 149-159 11 p.Research output: Contribution to journal › Conference Article › peer-review
3 Scopus citations -
1988
Modelling of the wet pressing of paper
Singh, K. M., Lewalle, J. & Bambacht, J. P., 1988, In: Engineering Conference, Proceedings of the Technical Association of the Pulp and Paper Industry. Bk-1, p. 219-222 4 p.Research output: Contribution to journal › Conference Article › peer-review
-
1983
COMBINED CYCLES FOR HYBRID FOSSIL/GEOTHERMAL POWER GENERATION.
Khalifa, H. E., Dec 1 1983, In: American Society of Mechanical Engineers (Paper).Research output: Contribution to journal › Conference Article › peer-review
-
1981
ECONOMIC IMPLICATIONS OF THE EXERGY AND THERMAL EFFICIENCIES OF ENERGY CONVERSION SYSTEMS.
Khalifa, H. E., 1981, In: Proceedings of the Intersociety Energy Conversion Engineering Conference. 1, p. 3-8 6 p.Research output: Contribution to journal › Conference Article › peer-review