Department of Mechanical & Aerospace Engineering

Filter
Conference contribution

Search results

  • 2011

    Experimental study on the uptake factor of tungsten oxide particles resulting from a dropped storage container

    Gao, Z., Zhang, J. S. & Byington, J. G. A., Dec 1 2011, 12th International Conference on Indoor Air Quality and Climate 2011. p. 1149-1154 6 p. (12th International Conference on Indoor Air Quality and Climate 2011; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Flame fuel cell using methane as a flame source

    Wang, K., Zeng, P. & Ahn, J., Dec 1 2011, 9th Annual International Energy Conversion Engineering Conference, IECEC 2011. (9th Annual International Energy Conversion Engineering Conference, IECEC 2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Insight into swept wing boundary-layer transition and turbulent flow physics from multi-point measurements

    Glauser, M. N., Saric, W. S., Chapman, K. L. & Reibert, M. S., Dec 1 2011, 41st AIAA Fluid Dynamics Conference and Exhibit. (41st AIAA Fluid Dynamics Conference and Exhibit).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Investigation of dynamic stall of airfoils and wings by CFD

    Dumlupinar, E. & Murthy, V., Jan 1 2011, 29th AIAA Applied Aerodynamics Conference 2011. American Institute of Aeronautics and Astronautics Inc., (29th AIAA Applied Aerodynamics Conference 2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    9 Scopus citations
  • Manufacturing footprint computation from detailed machining plans for sustainability assessment in manufacturing enterprises

    Turaga, A. K. & Roy, U., 2011, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B ed. p. 959-968 10 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Methane-based flame fuel cell using anode supported solid oxide fuel cells

    Wang, K., Zeng, P. & Ahn, J., Dec 1 2011, ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011. p. 55-58 4 p. (ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Methane-based flame fuel cell using anode supported solid oxide fuel cells

    Wang, K., Zeng, P., Schwartz, J. & Ahn, J., 2011, Energy Systems Analysis, Thermodynamics and Sustainability; Combustion Science and Engineering; Nanoengineering for Energy. PARTS A AND B ed. American Society of Mechanical Engineers (ASME), p. 1335-1338 4 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 4, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Microstructural and mechanical properties of polyester/nanoclay nanocomposites: Microstructure-mixing strategy correlation

    Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M. & Therriault, D., 2011, Polymer-Based Materials and Composites - Synthesis, Assembly, Properties and Applications. p. 151-159 9 p. (Materials Research Society Symposium Proceedings; vol. 1312).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Mixing strategy effects on physical properties of nanoclay nanocomposites

    Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Levesque, M. & Therriault, D., Dec 1 2011, 26th Annual Technical Conference of the American Society for Composites 2011 and the 2nd Joint US-Canada Conference on Composites. p. 1536-1542 7 p. (26th Annual Technical Conference of the American Society for Composites 2011 and the 2nd Joint US-Canada Conference on Composites; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Modeling and managing engineering changes in a complex product development process

    Li, W. & Moon, Y. B., 2011, Proceedings of the 2011 Winter Simulation Conference, WSC 2011. p. 792-804 13 p. 6147806. (Proceedings - Winter Simulation Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations
  • Non-propulsive miniature power device based on SOFC and combustion-driven thermal transpiration pump

    Wang, K., Zeng, P. & Ahn, J., Dec 1 2011, ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011. p. 59-61 3 p. (ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Preliminary investigation of the active flow control benefits on wind turbine blades

    Wang, G., Walczak, J., Elhadidi, B. & Glauser, M., Dec 1 2011, 6th AIAA Theoretical Fluid Mechanics Conference. (6th AIAA Theoretical Fluid Mechanics Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    6 Scopus citations
  • Reduced rack exhaust temperature gradient via variable chassis flow rate

    Dang, T., Serreli, C., Khalifa, H. E., Schmidt, R. R. & Iyengar, M., Dec 1 2011, ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011. p. 451-459 9 p. (ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Suction flow control at high reynolds number

    Wallace, R. D., Shea, P. R., Glauser, M. N., Vaithianathan, T., Carlson, H. A. & Schmit, R., 2011, 41st AIAA Fluid Dynamics Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc., (41st AIAA Fluid Dynamics Conference and Exhibit).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations
  • Surface reactions on the human body: Using personal ventilation to remove Squalene oxidation products from the breathing zone with CFD

    Russo, J. & Khalifa, H. E., Dec 1 2011, 12th International Conference on Indoor Air Quality and Climate 2011. p. 1719-1724 6 p. (12th International Conference on Indoor Air Quality and Climate 2011; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations
  • The usefulness of personal ventilation in typical office setups

    Russo, J. & Khalifa, H. E., Dec 1 2011, 12th International Conference on Indoor Air Quality and Climate 2011. p. 1727-1732 6 p. (12th International Conference on Indoor Air Quality and Climate 2011; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2010

    A no chamber fuel cell using ethanol as flame

    Wang, K., Ahn, J. & Shao, Z., 2010, Advances in Solid Oxide Fuel Cells V - A Collection of Papers Presented at the 33rd International Conference on Advanced Ceramics and Composites. 4 ed. American Ceramic Society, p. 53-62 10 p. (Ceramic Engineering and Science Proceedings; vol. 30, no. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • A shear-torsion-bending test for mixed-mode I-II-III delamination toughness determination

    Davidson, B. D., Sediles, F. O. & Humphreys, K. D., Dec 1 2010, 25th Technical Conference of the American Society for Composites and 14th US-Japan Conference on Composite Materials 2010. p. 1001-1020 20 p. (25th Technical Conference of the American Society for Composites and 14th US-Japan Conference on Composite Materials 2010; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    7 Scopus citations
  • Barely visible impact damage evaluation of composite sandwich structures

    Singh, A. K., Davidson, B. D., Eisenberg, D. P., Czabaj, M. W. & Zehnder, A. T., Dec 16 2010, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 2010-2770. (Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    12 Scopus citations
  • Closed-loop flow control for an articulating turret

    Wallace, R. D., Shea, P. R., Glauser, M. N., Vaithianathan, T. & Carlson, H. A., 2010, 5th Flow Control Conference. American Institute of Aeronautics and Astronautics Inc., 2010-4966. (5th Flow Control Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Combined experimental/numerical assessment of compression after impact of sandwich composite structures

    Czabaj, M. W., Zehnder, A. T., Davidson, B. D., Singh, A. K. & Eisenberg, D. P., Nov 9 2010, Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010. p. 2479-2486 8 p. (Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Compression after impact of sandwich composite structures: Experiments and modeling

    Czabaj, M. W., Zehnder, A. T., Davidson, B. D., Singh, A. K. & Eisenberg, D. P., Dec 16 2010, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 2010-2867. (Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    14 Scopus citations
  • Conjugate design/analysis procedure for film-cooled turbine airfoil sections

    Davis, R. L., Dannenhoffer, J. F. & Clark, J. P., 2010, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. 2010-1461. (48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations
  • Control of boundary representation topology in Multidisciplinary Analysis and Design

    Haimes, R. & Dannenhoffer, J. F., 2010, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. American Institute of Aeronautics and Astronautics Inc., 2010-1504. (48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    9 Scopus citations
  • Effects of subzero temperatures, seawater immersion and low velocity impact on flexural strength, stiffness and life of sandwich composites

    Davidson, B. D. & Singh, A. K., Dec 1 2010, 25th Technical Conference of the American Society for Composites and 14th US-Japan Conference on Composite Materials 2010. p. 518-532 15 p. (25th Technical Conference of the American Society for Composites and 14th US-Japan Conference on Composite Materials 2010; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Experimental and computational study of perforated floor tile in data centers

    Abdelmaksoud, W. A., Khalifa, H. E., Dang, T. Q., Elhadidi, B., Schmidt, R. R. & Iyengar, M., Aug 9 2010, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010. 5501413. (2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    58 Scopus citations
  • Feedback flow control for a pitching turret (Part I)

    Vaithianathan, T., Carlson, H. A., Wallace, R. D., Shea, P. R. & Glauser, M. N., 2010, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. American Institute of Aeronautics and Astronautics Inc., 2010-0360. (48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Scopus citations
  • Feedback flow control for a pitching turret (Part II)

    Wallace, R. D., Shea, P. R., Glauser, M. N., Vaithianathan, T. & Carlson, H. A., 2010, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. American Institute of Aeronautics and Astronautics Inc., 2010-0361. (48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    13 Scopus citations
  • Flow control effects on length scales over a turret

    Andino, M. Y. & Glauser, M. N., 2010, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. American Institute of Aeronautics and Astronautics Inc., 2010-0087. (48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations
  • Improved CFD modeling of a small data center test cell

    Abdelmaksoud, W. A., Khalifa, H. E., Dang, T. Q., Schmidt, R. R. & Iyengar, M., Aug 9 2010, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010. 5501425. (2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    46 Scopus citations
  • Investigation of different active flow control strategies for high speed jets using synthetic jet actuators

    Low, K. R., Hadidi, B. E., Andino, M. Y., Berdanier, R. & Glauser, M. N., Dec 2 2010, 40th AIAA Fluid Dynamics Conference. 2010-4267. (40th AIAA Fluid Dynamics Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    10 Scopus citations
  • Investigation of POD bases for flow control on disk wakes

    Berger, Z., Bigger, R., Fardad, M., Higuch, H., Glauser, M. N. & Orbaker, A. J., 2010, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting Collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010. PARTS A, B AND C ed. p. 1109-1116 8 p. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1, no. PARTS A, B AND C).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Low-dimensional description of the flow field over a hemisphere

    Andino, M. Y. & Glauser, M. N., Jan 1 2010, 40th AIAA Fluid Dynamics Conference. American Institute of Aeronautics and Astronautics Inc., 2010-4592. (40th AIAA Fluid Dynamics Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Mechanical properties of three-dimensional microstructures infiltrated by carbon nanotube/epoxy nanocomposite under shear flow

    Farahani, R. D., Dalir, H., Lévesque, M. & Therriault, D., 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. p. 689-694 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 10).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • UV-Assisted direct-write assembly of scaffold-templated nanoclay composites via biotin-streptavidin interactions

    Dalir, H., Farahani, R. D., Lévesque, M. & Therriault, D., 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. p. 899-904 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 10).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Scopus citations
  • 2009

    Agent-based modeling and simulation of resource allocation in engineering change management

    Wang, B. & Moon, Y. B., 2009, ICEIS 2009 - 11th International Conference on Enterprise Information Systems, Proceedings. p. 281-284 4 p. (ICEIS 2009 - 11th International Conference on Enterprise Information Systems, Proceedings; vol. AIDSS).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations
  • A simulation model for managing engineering changes along with new product development

    Li, W. & Moon, Y. B., 2009, ICEIS 2009 - 11th International Conference on Enterprise Information Systems, Proceedings. INSTICC Press, p. 13-18 6 p. (ICEIS 2009 - 11th International Conference on Enterprise Information Systems, Proceedings; vol. ISAS).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Scopus citations
  • A simulation study of mutual influences of engineering change management process and new product development process

    Li, W. & Moon, Y. B., 2009, Proceedings of the 2009 Winter Simulation Conference, WSC 2009. p. 2940-2950 11 p. 5429230. (Proceedings - Winter Simulation Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    8 Scopus citations
  • Automated creation of overset grids directly from solid-model feature trees

    Dannenhoffer, J. F. & Davis, R. L., Dec 1 2009, 19th AIAA Computational Fluid Dynamics Conference. 2009-3991. (19th AIAA Computational Fluid Dynamics Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Scopus citations
  • Closed-loop control of a turbulent compressible Mach 0.6 Jet

    Low, K. R., Andino, M. Y., Wallace, R. M., Hall, A. M. & Glauser, M. N., 2009, 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. 2009-0854. (47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Flow characteristics of active control around a 3D turret

    Wallace, R. D., Andino, M. Y., Glauser, M. N., Camphouse, R. C., Schmit, R. & Myatt, J. H., 2009, 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. 2009-0573. (47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    9 Scopus citations
  • Fully three-dimensional viscous semi-inverse method for subsonic mixed-flow and radial impeller design

    Ji, M., Dang, T. Q. & Cave, M. J., 2009, Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea and Air. PART A ed. p. 467-476 10 p. (Proceedings of the ASME Turbo Expo; vol. 7, no. PART A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • On the control of environmental conditions using personal ventilation systems

    Hedge, A., Khalifa, H. E. & Zhang, J., 2009, 53rd Human Factors and Ergonomics Society Annual Meeting 2009, HFES 2009. Human Factors an Ergonomics Society Inc., p. 536-540 5 p. (Proceedings of the Human Factors and Ergonomics Society; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Scopus citations
  • Optimal controller for an autonomous helicopter in hovering and forward flight

    Zhao, L. & Murthy, V. R., Dec 1 2009, 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. 2009-0057. (47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    10 Scopus citations
  • Work in progress - A system-of-systems approach to teaching product lifecycle management (PLM)

    Moon, Y. B., Contero, M. & Mendívil, E. G., Dec 1 2009, 39th Annual Frontiers in Education Conference: Imagining and Engineering Future CSET Education, FIE 2009. 5350805. (Proceedings - Frontiers in Education Conference, FIE).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Work in progress - The european higher education area ("Bologna process") in engineering education in Spain

    Duran, A., Moon, Y. B. & Giraldo, E., Dec 1 2009, 39th Annual Frontiers in Education Conference: Imagining and Engineering Future CSET Education, FIE 2009. 5350475. (Proceedings - Frontiers in Education Conference, FIE).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Scopus citations
  • 2008

    A detached-eddy simulation procedure targeted for design

    Davis, R. L. & Dannenhoffer, J. F., Dec 1 2008, 46th AIAA Aerospace Sciences Meeting and Exhibit. 2008-0534. (46th AIAA Aerospace Sciences Meeting and Exhibit).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Scopus citations
  • An evaluation mechanism for defining gaps and overlaps of product information exchange standards

    Sarigecili, M. I., Baysal, M. M., Roy, U., Rachuri, S., Sriram, R. D. & Mani, M., 2008, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE 2007. p. 179-185 7 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • A practical approach to individual thermal comfort and energy optimization problem

    Ari, S., Wilcoxen, P., Khalifa, H. E., Dannenhoffer, J. F. & Isik, C., Sep 11 2008, 2008 Annual Meeting of the North American Fuzzy Information Processing Society, NAFIPS 2008. 4531261. (Annual Conference of the North American Fuzzy Information Processing Society - NAFIPS).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    13 Scopus citations
  • A proposed lexicon for class definition in a product lifecycle model

    Lingo, L. E. & Roy, U., 2008, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE 2007. p. 149-157 9 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution