Department of Mechanical & Aerospace Engineering

Filter
Conference contribution

Search results

  • 2010

    Flow control effects on length scales over a turret

    Andino, M. Y. & Glauser, M. N., 2010, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. American Institute of Aeronautics and Astronautics Inc., 2010-0087. (48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations
  • Improved CFD modeling of a small data center test cell

    Abdelmaksoud, W. A., Khalifa, H. E., Dang, T. Q., Schmidt, R. R. & Iyengar, M., Aug 9 2010, 2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010. 5501425. (2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2010).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    46 Scopus citations
  • Investigation of different active flow control strategies for high speed jets using synthetic jet actuators

    Low, K. R., Hadidi, B. E., Andino, M. Y., Berdanier, R. & Glauser, M. N., Dec 2 2010, 40th AIAA Fluid Dynamics Conference. 2010-4267. (40th AIAA Fluid Dynamics Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    10 Scopus citations
  • Investigation of POD bases for flow control on disk wakes

    Berger, Z., Bigger, R., Fardad, M., Higuch, H., Glauser, M. N. & Orbaker, A. J., 2010, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting Collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010. PARTS A, B AND C ed. p. 1109-1116 8 p. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1, no. PARTS A, B AND C).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Low-dimensional description of the flow field over a hemisphere

    Andino, M. Y. & Glauser, M. N., Jan 1 2010, 40th AIAA Fluid Dynamics Conference. American Institute of Aeronautics and Astronautics Inc., 2010-4592. (40th AIAA Fluid Dynamics Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Mechanical properties of three-dimensional microstructures infiltrated by carbon nanotube/epoxy nanocomposite under shear flow

    Farahani, R. D., Dalir, H., Lévesque, M. & Therriault, D., 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. p. 689-694 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 10).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • UV-Assisted direct-write assembly of scaffold-templated nanoclay composites via biotin-streptavidin interactions

    Dalir, H., Farahani, R. D., Lévesque, M. & Therriault, D., 2010, ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010. p. 899-904 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 10).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Scopus citations
  • 2011

    A pilot study on the effects of ventilation rate on creativity performance

    Wang, J., Burris, M., Hedge, A., Koszalka, T. A. & Zhang, J. S., Dec 1 2011, 12th International Conference on Indoor Air Quality and Climate 2011. p. 331-336 6 p. (12th International Conference on Indoor Air Quality and Climate 2011; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Automated creation of 3-D overset grids directly from solid models

    Dannenhoffer, J. F. & Haimesy, R., 2011, 20th AIAA Computational Fluid Dynamics Conference 2011. American Institute of Aeronautics and Astronautics Inc., (20th AIAA Computational Fluid Dynamics Conference 2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Scopus citations
  • Can commonly-used active air cleaning technologies improve indoor air quality? A literature review

    Zhang, Y., Mo, J., Li, Y., Sundell, J., Wargocki, P., Zhang, J., Little, J. C., Corsi, R., Deng, Q., Leung, M. K. H., Fang, L., Chen, W., Li, J. & Sun, Y., Dec 1 2011, 12th International Conference on Indoor Air Quality and Climate 2011. p. 2695-2696 2 p. (12th International Conference on Indoor Air Quality and Climate 2011; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Catalytic combustion-driven thermal transpiration pump and power generation device

    Zeng, P., Wang, K. & Ahn, J., 2011, 9th Annual International Energy Conversion Engineering Conference, IECEC 2011. American Institute of Aeronautics and Astronautics Inc., (9th Annual International Energy Conversion Engineering Conference, IECEC 2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Catalytic oxidization of formaldehyde under room temperature

    Pei, J., Zhang, J. S., Chadwick, W. C. & Adams, E., 2011, 12th International Conference on Indoor Air Quality and Climate 2011. p. 2709-2714 6 p. (12th International Conference on Indoor Air Quality and Climate 2011; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Combined experimental/numerical assessment of compression after impact of sandwich composite structures

    Czabaj, M. W., Zehnder, A. T., Davidson, B. D., Singh, A. K. & Eisenberg, D. P., Dec 1 2011, Experimental and Applied Mechanics - Proceedings of the 2010 Annual Conference on Experimental and Applied Mechanics. p. 793-800 8 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 6).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations
  • Combustion-driven thermal transpiration based miniature SOFC power generation device

    Zeng, P., Wang, K., Menapace, N. & Ahn, J., 2011, ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011. PARTS A AND B ed. p. 1331-1334 4 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 4, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Compression/shear response of honeycomb core

    Czabaj, M. W., Tubbs, W. R., Zehnder, A. T. & Davidson, B. D., Dec 1 2011, Experimental and Applied Mechanics - Proceedings of the 2011 Annual Conference on Experimental and Applied Mechanics. p. 393-398 6 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 6).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Scopus citations
  • Consideration of the change of material emission signatures due to longterm emissions for enhancing VOC source identification

    Han, K. H., Zhang, J. S., Knudsen, H. N., Wargocki, P. & Guo, B., Dec 1 2011, 12th International Conference on Indoor Air Quality and Climate 2011. p. 566-571 6 p. (12th International Conference on Indoor Air Quality and Climate 2011; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Correlations and wavelet based analysis of near-field and far-field pressure of a controlled high speed jet

    Low, K. R., Berger, Z. P., Lewalle, J., El-Hadidi, B. & Glauser, M. N., 2011, 41st AIAA Fluid Dynamics Conference and Exhibit. (41st AIAA Fluid Dynamics Conference and Exhibit).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    14 Scopus citations
  • Dependence of contaminant transport on temperature differences in cubicle environments

    Dhummi, V., Palanthandalam-Madapusi, H. & Khalifa, H. E., Dec 1 2011, 12th International Conference on Indoor Air Quality and Climate 2011. p. 1754-1759 6 p. (12th International Conference on Indoor Air Quality and Climate 2011; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Design of simulated server racks for data center research

    Smith, J. F., Abdelmaksoud, W. A., Erden, H. S., Dannenhoffer, J. F., Dang, T. Q., Khalifa, H. E., Schmidt, R. R. & Iyengar, M., 2011, ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011. p. 415-422 8 p. (ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    12 Scopus citations
  • Determination of partition and diffusion coefficient of formaldehyde in selected building materials and impact of relative humidity

    Xu, J., Zhang, J. S. & Liu, X., Dec 1 2011, 12th International Conference on Indoor Air Quality and Climate 2011. p. 1779-1784 6 p. (12th International Conference on Indoor Air Quality and Climate 2011; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Development of a dynamic energy use modeling tool for data center cooling infrastructure

    Demetriou, D. W., Khalifa, H. E., Schmidt, R. & Iyengar, M., Dec 1 2011, ASHRAE Transactions - Papers Presented at the 2011 Annual Conference in Montreal, Quebec, Canada of the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.. PART 2 ed. p. 3-9 7 p. (ASHRAE Transactions; vol. 117, no. PART 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Energy modeling of air-cooled data centers: Part II the effect of recirculation on the energy optimization of open-aisle, air-cooled data centers

    Demetriou, D. W. & Khalifa, H. E., Dec 1 2011, ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011. p. 395-404 10 p. (ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    8 Scopus citations
  • Energy modeling of air-cooled data centers: Part I the optimization of enclosed aisle configurations

    Demetriou, D. W. & Khalifa, H. E., Dec 1 2011, ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011. p. 385-394 10 p. (ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    11 Scopus citations
  • Evaluation of a data center recirculation non-uniformity metric using computational fluid dynamics

    Demetriou, D. W. & Khalifa, H. E., Dec 1 2011, ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011. p. 405-414 10 p. (ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations
  • Experimental study on the uptake factor of tungsten oxide particles resulting from a dropped storage container

    Gao, Z., Zhang, J. S. & Byington, J. G. A., Dec 1 2011, 12th International Conference on Indoor Air Quality and Climate 2011. p. 1149-1154 6 p. (12th International Conference on Indoor Air Quality and Climate 2011; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Flame fuel cell using methane as a flame source

    Wang, K., Zeng, P. & Ahn, J., Dec 1 2011, 9th Annual International Energy Conversion Engineering Conference, IECEC 2011. (9th Annual International Energy Conversion Engineering Conference, IECEC 2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Insight into swept wing boundary-layer transition and turbulent flow physics from multi-point measurements

    Glauser, M. N., Saric, W. S., Chapman, K. L. & Reibert, M. S., Dec 1 2011, 41st AIAA Fluid Dynamics Conference and Exhibit. (41st AIAA Fluid Dynamics Conference and Exhibit).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Investigation of dynamic stall of airfoils and wings by CFD

    Dumlupinar, E. & Murthy, V., Jan 1 2011, 29th AIAA Applied Aerodynamics Conference 2011. American Institute of Aeronautics and Astronautics Inc., (29th AIAA Applied Aerodynamics Conference 2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    9 Scopus citations
  • Manufacturing footprint computation from detailed machining plans for sustainability assessment in manufacturing enterprises

    Turaga, A. K. & Roy, U., 2011, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B ed. p. 959-968 10 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Methane-based flame fuel cell using anode supported solid oxide fuel cells

    Wang, K., Zeng, P. & Ahn, J., Dec 1 2011, ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011. p. 55-58 4 p. (ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Methane-based flame fuel cell using anode supported solid oxide fuel cells

    Wang, K., Zeng, P., Schwartz, J. & Ahn, J., 2011, Energy Systems Analysis, Thermodynamics and Sustainability; Combustion Science and Engineering; Nanoengineering for Energy. PARTS A AND B ed. American Society of Mechanical Engineers (ASME), p. 1335-1338 4 p. (ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011; vol. 4, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Microstructural and mechanical properties of polyester/nanoclay nanocomposites: Microstructure-mixing strategy correlation

    Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Lévesque, M. & Therriault, D., 2011, Polymer-Based Materials and Composites - Synthesis, Assembly, Properties and Applications. p. 151-159 9 p. (Materials Research Society Symposium Proceedings; vol. 1312).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Mixing strategy effects on physical properties of nanoclay nanocomposites

    Dalir, H., Farahani, R. D., Nhim, V., Samson, B., Levesque, M. & Therriault, D., Dec 1 2011, 26th Annual Technical Conference of the American Society for Composites 2011 and the 2nd Joint US-Canada Conference on Composites. p. 1536-1542 7 p. (26th Annual Technical Conference of the American Society for Composites 2011 and the 2nd Joint US-Canada Conference on Composites; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Modeling and managing engineering changes in a complex product development process

    Li, W. & Moon, Y. B., 2011, Proceedings of the 2011 Winter Simulation Conference, WSC 2011. p. 792-804 13 p. 6147806. (Proceedings - Winter Simulation Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations
  • Non-propulsive miniature power device based on SOFC and combustion-driven thermal transpiration pump

    Wang, K., Zeng, P. & Ahn, J., Dec 1 2011, ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011. p. 59-61 3 p. (ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology. Collocated with ASME 2011 5th International Conference on Energy Sustainability, FUELCELL 2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Preliminary investigation of the active flow control benefits on wind turbine blades

    Wang, G., Walczak, J., Elhadidi, B. & Glauser, M., Dec 1 2011, 6th AIAA Theoretical Fluid Mechanics Conference. (6th AIAA Theoretical Fluid Mechanics Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    6 Scopus citations
  • Reduced rack exhaust temperature gradient via variable chassis flow rate

    Dang, T., Serreli, C., Khalifa, H. E., Schmidt, R. R. & Iyengar, M., Dec 1 2011, ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011. p. 451-459 9 p. (ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, InterPACK 2011; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Suction flow control at high reynolds number

    Wallace, R. D., Shea, P. R., Glauser, M. N., Vaithianathan, T., Carlson, H. A. & Schmit, R., 2011, 41st AIAA Fluid Dynamics Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc., (41st AIAA Fluid Dynamics Conference and Exhibit).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations
  • Surface reactions on the human body: Using personal ventilation to remove Squalene oxidation products from the breathing zone with CFD

    Russo, J. & Khalifa, H. E., Dec 1 2011, 12th International Conference on Indoor Air Quality and Climate 2011. p. 1719-1724 6 p. (12th International Conference on Indoor Air Quality and Climate 2011; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations
  • The usefulness of personal ventilation in typical office setups

    Russo, J. & Khalifa, H. E., Dec 1 2011, 12th International Conference on Indoor Air Quality and Climate 2011. p. 1727-1732 6 p. (12th International Conference on Indoor Air Quality and Climate 2011; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2012

    Active flow control of a pitching turret flow field using closed-loop feedback control

    Shea, P. R., Glauser, M. N., Carlson, H. A., Verberg, R. & Schmit, R. F., 2012, 6th AIAA Flow Control Conference 2012. American Institute of Aeronautics and Astronautics Inc., (6th AIAA Flow Control Conference 2012).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations
  • Characterization of lipid membrane properties for tunable electroporation

    Cho, H. J., Maroo, S. C. & Wang, E. N., 2012, ASME 2012 3rd International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2012. p. 345-353 9 p. (ASME 2012 3rd International Conference on Micro/Nanoscale Heat and Mass Transfer, MNHMT 2012).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Charge distribution & surface properties of the tobacco mosaic virus 4-NM central-pore

    Rodionov, N. I. & Maroo, S. C., Dec 1 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. p. 15-20 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Effect of virtualization on the cooling infrastructure's power consumption in enclosed aisle data centers

    Demetriou, D. W. & Khalifa, H. E., 2012, Proceedings of the 13th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm 2012. p. 358-366 9 p. 6231452. (InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITHERM).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations
  • Evaluation of new test methods for the determination of giiic of laminated polymeric composites

    Johnston, A. L., Davidson, B. D. & Simon, K. K., Dec 1 2012, 27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting. p. 120-139 20 p. (27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Scopus citations
  • Experimental and parametric study on the uptake factor of tungsten oxide particles resulting from a dropped storage container

    Gao, Z. & Jianshun, Z., Dec 1 2012, 10th International Conference on Healthy Buildings 2012. p. 254-259 6 p. (10th International Conference on Healthy Buildings 2012; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • High subsonic jet flow physics and noise

    Berger, Z. P., Low, K. R., Glauser, M. N., Kostka, S., Gogineni, S., Cordier, L. & Noack, B. R., Dec 1 2012, 41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012. p. 4255-4266 12 p. (41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012; vol. 5).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Investigation of an axisymmetric transonic jet with high resolution time-resolved PIV

    Berger, Z., Low, K., Kostka, S., Gogineni, S. & Glauser, M. N., 2012, 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit 2012. American Institute of Aeronautics and Astronautics Inc., (48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit 2012).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    7 Scopus citations
  • Modeling and model-based test method for chemisorption of formaldehyde in porous material

    Pei, J. & Zhang, J., Dec 1 2012, 10th International Conference on Healthy Buildings 2012. p. 2601-2606 6 p. (10th International Conference on Healthy Buildings 2012; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Modeling emissions from a multi-layer furniture material assembly

    Xu, J. & Zhang, J. S., Dec 1 2012, 10th International Conference on Healthy Buildings 2012. p. 2595-2600 6 p. (10th International Conference on Healthy Buildings 2012; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution