Department of Mechanical & Aerospace Engineering

Research output

Research output per year 1976 2005 2006 2007 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024

• 686 Article
• 513 Conference contribution
• 124 Paper
• 83 Conference Article
• 104 More
  • 36 Patent
  • 34 Review article
  • 12 Editorial
  • 11 Chapter
  • 3 Foreword/postscript
  • 3 Comment/Debate/Erratum
  • 2 Book
  • 1 Chapter (peer-reviewed)
  • 1 Letter/Newsletter
  • 1 Short Survey Article

Research output per year

Research output per year

Search results

• 2005

  A generic deviation-based approach for synthesis of tolerances

  Pramanik, N., Roy, U., Sudarsan, R., Sriram, R. D. & Lyons, K. W., Oct 2005, In: IEEE Transactions on Automation Science and Engineering. 2, 4, p. 358-368 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Process Optimization 100%
  • Generalized Coordinate System 50%
  • Nonlinear Constrained Optimization 50%
  • Assemblability 50%
  • Small Displacement Torsor 50%
  6 Scopus citations

• A graph-based method for mechanical product family modeling and functional tolerancing

  Wang, H. & Roy, U., 2005, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conferences - DETC2005: 31st Design Automation Conference. American Society of Mechanical Engineers, p. 141-154 14 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; vol. 2 A).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Product Family Modeling 100%
  • Functional Tolerancing 100%
  • Graphical Method 100%
  • Mechanical Product 100%
  • Mass Customization 100%
  8 Scopus citations

• Analysis of web defects by correlating 1-D Morlet and 2-D Mexican hat wavelet transforms

  Lewalle, J. & Keller, D. S., 2005, In: Proceedings of SPIE - The International Society for Optical Engineering. 6001, 600109.

  Research output: Contribution to journal › Conference Article › peer-review

  • Grammage 100%
  • Wavelet 100%
  • Wavelet Analysis 100%
  • Unit Area 33%
  • Non-wood Fibers 25%
  2 Scopus citations

• A new look at zooming

  Dannenhoffer, J. F. & Varano, N. D., 2005, p. 2427-2431. 5 p.

  Research output: Contribution to conference › Paper › peer-review

  • Two Dimensional 100%
  • Computational Cost 100%
  • Perceived Difficulty 100%
  • Inviscid 100%
  • Computational Results 100%
  1 Scopus citations

• An experimental investigation of the pressure-velocity cross-correlation in an axisymmetric jet

  Hall, A. M., Glauser, M. N. & Tinney, C. E., 2005, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005. p. 877-888 12 p. (Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005; vol. 2005).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Streamwise 100%
  • Axisymmetric 100%
  • Potential Core 100%
  • Experimental Investigation 100%
  • Axisymmetric Jet 100%

• An experimental investigation of the pressure-velocity cross-correlation in an axisymmetric jet

  Hall, A. M., Glauser, M. N. & Tinney, C. E., 2005, Proceedings of ASME Fluids Engineering Division Summer Conference, 2005 Symposia, FEDSM2005. p. 357-368 12 p. FEDSM2005-77338. (Proceedings of the American Society of Mechanical Engineers Fluids Engineering Division Summer Conference; vol. 1 PART A).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Core Layer 100%
  • Exit Temperature 66%
  • Measurement Volume 33%
  • Lip Force 33%
  • Pressure Correlation 33%

• A PIV analysis around a thermal breathing manikin

  Marr, D., Sheth, R. A., Glauser, M. & Higuchi, H., 2005, Energy Conversion and Resources 2005. p. 77-81 5 p. (Energy Conversion and Resources 2005; vol. 2005).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Particle Image Velocimetry 100%
  • Velocity Measurement 100%
  • Charge Flow Device 50%
  • Essential Structures 33%
  • Calibration Validation 33%

• Application of proper orthogonal decomposition to indoor airflows

  Elhadidi, B. & Khalifa, H. E., 2005, In: ASHRAE Transactions. 111 PART 1, p. 625-634 10 p., OR-05-5-3.

  Research output: Contribution to journal › Conference Article › peer-review

  • Proper Orthogonal Decomposition 100%
  • Computational Fluid Dynamics 50%
  • Temperature Distribution 50%
  • Flow Condition 50%
  • Base Case 50%
  30 Scopus citations

• Assessing the impact of integrating a MES to an ERP system

  Moon, Y. B. & Bahl, V., 2005, ICEIS 2005 - Proceedings of the 7th International Conference on Enterprise Information Systems. p. 300-304 5 p. (ICEIS 2005 - Proceedings of the 7th International Conference on Enterprise Information Systems).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Shop Floor 100%
  • Handling Uncertainty 50%
  • Unexpected Event 50%
  • Integrated System 50%
  • Unexpected Events 50%
  2 Scopus citations

• BIT Numerical Mathematics: Editorial

  Åhlander, K., Allen, E., Aptekarev, A. I., Arioli, M., Arnold, M., Asadzadeh, M., Baglama, J., Bailly, C., Baker, C., Bartels, S., Bendali, A., Benzi, M., Berntsson, F., Breda, D., Brunner, H., Capizzano, S. S., Cash, J., Chan, R., Chandrasekaran, S. & Chang, X. W. & 79 others, Chern, I. L., Crouzeix, M., Van Daele, M., Damhaug, A. C., Davis, T., Davydov, O., Dieci, L., Eriksson, J., Eriksson, L. E., Espelid, T., Estep, D., Fontich, E., Ford, N., Fornberg, B., Foster, L., Frank, J., Gander, W., Garća-Palomares, U. M., Giraud, L., Greenbaum, A., Gripenberg, G., Gulliksson, M., Gustafsson, B., Gustafsson, N., Hairer, E., Hanke, M., Hanke, M., Heggernes, P., Van Emden Henson, E. H., Hesthaven, J., Sanz, I. H., Hochbruck, M., Hochstenbach, M., Huckle, T., Kamvar, S., Kaps, P., Karlsen, K. H., Klarbring, A., Knizhnerman, L., Kopotum, K., Korotov, S., Kuijlaars, A., Kværnø, A., Langtangen, H. P., Larsson, E., Lenarduzzi, L., Lewalle, J., Li, R. C., Lin, P., Malyshev, A., Marletta, M., Mazzia, F., Mehl, C., Moore, P., Müller, B., Mørken, K., Neytcheva, M., Niederman, L., Olver, S., Ostrouchov, G., Pareschi, L., Parlett, B. N., Pralet, S., Raghavan, P., Rannacher, R., Runborg, O., Ruuth, S., Sand, J., Saunders, M., Sauter, S., Savaré, G., Shen, W. Z., Sidi, A., Spiteri, R., Steihaug, T., Stenger, F., Stoer, J., Strakoš, Z. & Tang, T., Dec 2005, In: BIT Numerical Mathematics. 45, 4, p. v-vi

  Research output: Contribution to journal › Editorial › peer-review

• Closed-loop feedback control of the turbulent flow over a NACA-4412 airfoil

  Ausseur, J. M., Pinier, J. T., Glauser, M. N. & Higuchi, H., 2005, p. 105-109. 5 p.

  Research output: Contribution to conference › Paper › peer-review

  • Turbulent Flow 100%
  • Airfoil 100%
  • NACA 4412 100%
  • Closed-loop Feedback Control 100%
  • Feedback Control 100%

• Combined heat, air, moisture, and pollutants transport in building environmental systems

  Zhang, J. S., May 2005, In: JSME International Journal, Series B: Fluids and Thermal Engineering. 48, 2, p. 182-190 9 p.

  Research output: Contribution to journal › Review article › peer-review

  • Pollutant Transport 100%
  • Moisture Transport 100%
  • Air Transport 100%
  • Building Shell 66%
  • Review Paper 33%
  29 Scopus citations

• Constrained fuzzy logic approximation for indoor comfort and energy optimization

  Ari, S., Cosden, I. A., Khalifa, H. E., Dannenhoffer, J. F., Wilcoxen, P. & Isik, C., 2005, p. 500-504. 5 p.

  Research output: Contribution to conference › Paper › peer-review

  • Approximation (Algorithm) 100%
  • Energy Consumption 100%
  • Energy Optimization 100%
  • Fuzzy Logic 100%
  • Environmental Control 100%
  35 Scopus citations

• Controller development for closed-loop feedback control of flows

  Ausseur, J. M., Pinier, J. T., Glauser, M. N., Higuchi, H. & Carlson, H., 2005, 35th AIAA Fluid Dynamics Conference and Exhibit. (35th AIAA Fluid Dynamics Conference and Exhibit).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Controller Development 100%
  • Velocity Measurement 100%
  • Feedback Method 20%
  • Order Estimation 20%
  • System of Ordinary Differential Equations 20%
  15 Scopus citations

• Coupling of airflow and pollutant dispersion models with evacuation planning algorithms for building system controls

  Zhang, J. S., Mohan, C. K., Varshney, P., Isik, C., Mehrotra, K., Wang, S., Gao, Z. & Rajagopalan, R., 2005, In: ASHRAE Transactions. 111 PART 1, p. 196-209 14 p., 4760.

  Research output: Contribution to journal › Conference Article › peer-review

  • Pollutant Dispersion 100%
  • Pollutant Dispersion Model 100%
  • Evacuation Planning 100%
  • Dispersion Management 60%
  • Pollutant Release 40%
  4 Scopus citations

• Design issues in a cross-institutional collaboration on a distance education course

  Wang, X., Dannenhoffer, J. F., Davidson, B. D. & Spector, J. M., Nov 2005, In: Distance Education. 26, 3, p. 405-423 19 p.

  Research output: Contribution to journal › Review article › peer-review

  • Distance Education Courses 100%
  • Institutional Collaboration 100%
  • Faculty Collaboration 100%
  • Asynchronous Interaction 100%
  • Synchronous Interaction 100%
  17 Scopus citations

• Determination of building materials' transport properties for modeling VOC emissions

  Yang, M., Zhang, J. S., Li, H., Dang, T. Q. & Gao, X. F., 2005, In: ASHRAE Transactions. 111 PART 1, p. 88-100 13 p., 4750.

  Research output: Contribution to journal › Conference Article › peer-review

  • Building Material 100%
  • Diffusion Coefficient 100%
  • Diffusivity 100%
  • Measured Data 50%
  • Desorption 50%
  4 Scopus citations

• Development of a morphing micro air vehiclewing using low dimensional tools

  Martin, T., Guitton, A., Schmit, R. & Glauser, M. N., 2005, 35th AIAA Fluid Dynamics Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc., (35th AIAA Fluid Dynamics Conference and Exhibit).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Micro Air Vehicle 100%
  • Dynamic Strain 50%
  • Piezoelectricity 50%
  • Estimation Method 25%
  • Proper Orthogonal Decomposition 25%
  1 Scopus citations

• Development of a morphing micro air vehicle wing using the combined POD and LSE technique

  Martin, T., Guitton, A., Schmit, R. & Glauser, M. N., 2005, Collection of Technical Papers - InfoTech at Aerospace: Advancing Contemporary Aerospace Technologies and Their Integration. p. 2269-2277 9 p. (Collection of Technical Papers - InfoTech at Aerospace: Advancing Contemporary Aerospace Technologies and Their Integration; vol. 4).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Micro Air Vehicle 100%
  • Flow Control Method 16%
  • Experience Flow 16%
  • Piezoelectric Actuation 16%
  • Velocity Flow Field 16%
  5 Scopus citations

• Effects of axial load on wave propagation in double-walled carbon nanotubes used as a flexible tip in AFM

  Dalir, H., Hatsuzawa, T., Akbari, J. & Farshidianfar, A., 2005, Proc. of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conferences - DETC2005: 20th Biennial Conf. on Mechanical Vibration and Noise. American Society of Mechanical Engineers, p. 433-439 7 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; vol. 1 A).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Critical Frequency 100%
  • Wave Speed 100%
  • Flexible Tip 100%
  • Timoshenko Beam Model 40%
  • Terahertz Range 20%

• Effects of friction, geometry, and fixture compliance on the perceived toughness from three-and four-point bend end-notched flexure tests

  Davidson, B. D. & Sun, X., 2005, In: Journal of Reinforced Plastics and Composites. 24, 15, p. 1611-1628 18 p.

  Research output: Contribution to journal › Article › peer-review

  • Finite Element Method 100%
  • Flexural Testing 100%
  • Finite Element Simulation 100%
  • Flexing 100%
  • Span Length 50%
  93 Scopus citations

• Energy release rate prediction in stiffened-skin structure using a three-dimensional crack tip element analysis

  Davidson, B. D. & Lijie, Y. U., 2005, In: Journal of Composite Materials. 39, 20, p. 1819-1842 24 p.

  Research output: Contribution to journal › Article › peer-review

  • Crack Tip 100%
  • Energy Release Rate 100%
  • Skin Structure 100%
  • Good Agreement 20%
  • Delamination 20%
  7 Scopus citations

• Enhancing ERP system's functionality with discrete event simulation

  Moon, Y. B. & Phatak, D., 2005, In: Industrial Management and Data Systems. 105, 9, p. 1206-1224 19 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Enterprise Resource Planning Systems 100%
  • System Functionality 100%
  • Enterprise Resource Planning System 100%
  • Enterprise Resource Planning Implementation 22%
  • Material Requirements Planning 22%
  49 Scopus citations

• Experimental investigation of the pressure-velocity correlation of a M=0.6 axisymmetric jet

  Hall, A. M., Glauser, M. N. & Tinney, C. E., 2005, 35th AIAA Fluid Dynamics Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc., (35th AIAA Fluid Dynamics Conference and Exhibit).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Streamwise 100%
  • Axisymmetric 100%
  • Potential Core 100%
  • Azimuthal 100%
  • Experimental Investigation 100%
  9 Scopus citations

• Frequency response of longitudinal vibration using distributed-lumped modelling technique

  Farshidianfar, A., Dalir, H., Farshidianfar, A. & Farshidianfar, K., 2005, 12th International Congress on Sound and Vibration 2005, ICSV 2005. p. 3967-3974 8 p. (12th International Congress on Sound and Vibration 2005, ICSV 2005; vol. 5).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Longitudinal Vibration 100%
  • Lumped Modeling 100%
  • Rotating System 33%
  • Longitudinal Vibration System 33%
  • Parameter Model 33%

• Global effects of flow control over a NACA 4412 hydrofoil

  Andino, M. Y., Braud, C., Glauser, M. N., Higuchi, H. & van Langen, P., 2005, 35th AIAA Fluid Dynamics Conference and Exhibit. (35th AIAA Fluid Dynamics Conference and Exhibit).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Reynolds-averaged Navier-Stokes (RANS) Equations 100%
  • Actuator System 100%
  • RANS Equations 100%
  • System Image 100%
  4 Scopus citations

• Improving aerodynamic matching of axial compressor blading using a 3D multistage inverse design method

  Van Rooij, M. P. C., Dang, T. Q. & Larosiliere, L. M., 2005, p. 1019-1032. 14 p.

  Research output: Contribution to conference › Paper › peer-review

  • Inverse Design 100%
  • Aerodynamics 100%
  • Blade Rows 100%
  • Axial Compressor 100%
  • Inverse Design Method 100%
  3 Scopus citations

• Information models for product representation: core and assembly models

  Rachuri, S., Baysal, M., Roy, U., Foufou, S., Bock, C., Fenves, S. J., Subrahmanian, E., Lyons, K. & Sriram, R. D., 2005, In: International Journal of Product Development. 2, 3, p. 207-235 29 p.

  Research output: Contribution to journal › Article › peer-review

  • Core Representation 100%
  • Product Information 100%
  • Open Model 100%
  • Information Modeling 50%
  • Product Information Modeling 25%
  38 Scopus citations

• Investigating the 'modified' complementary technique using pressure-velocity correlations of an axisymmetric jet

  Hall, A. M., Tinney, C. E. & Glauser, M. N., 2005, p. 6899-6912. 14 p.

  Research output: Contribution to conference › Paper › peer-review

  • Dynamic Pressure Transducer 100%
  • Laser Head 100%
  3 Scopus citations

• Low-dimensional signatures of the sound production mechanisms in subsonic jets: Towards their identification and control

  Jordan, P., Tinney, C. E., Delville, J., Coiffet, F., Glauser, M. & Hall, A., 2005, 35th AIAA Fluid Dynamics Conference and Exhibit. (35th AIAA Fluid Dynamics Conference and Exhibit).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Jet Noise 100%
  • Sound Production Mechanism 100%
  • Subsonic Jet 100%
  • Building Block 100%
  • Jet Aircraft Noise 100%
  24 Scopus citations

• Measurements and modeling of VOC emissions from a large wall assembly of typical wood-framed residential houses

  Li, H., Zhang, J. S., Yang, M. & Salonvaara, M., 2005, In: ASHRAE Transactions. 111 PART 1, p. 210-217 8 p., 4761.

  Research output: Contribution to journal › Conference Article › peer-review

  • Construction Stage 100%
  • Batt Insulation 100%
  • Mineral Wool 100%
  • Vapor Barrier 80%
  • Vinyl Siding 80%
  4 Scopus citations

• New trends in engineering education: The AGEP: CNY-PR

  Castillo, L., Arocha, M., Esteves, A., Ramirez-Vick, J., Lee-Glauser, G., Glauser, M., Apple, T., Warhaft, Z., Vasquez, R. & Freund, D., 2005, Proceedings - Thirteenth International Symposium on Temporal Representation and Reasoning, TIME 2006. p. S1A-1-S1A-6 1560311. (ITHET 2005: 6th International Conference on Information Technology Based Higher Education and Training, 2005; vol. 2005).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Professoriate 100%
  • Puerto Rico 100%
  • Knowledge Increase 33%
  • Engineering Graduates 33%
  • Polytechnic Institutes 33%
  1 Scopus citations

• On Particle Image Velocimetry (PIV) measurements in the breathing zone of a thermal breathing manikin

  Marr, D., Higuchi, H., Khan, T., Zhang, J. & Glauser, M., 2005, In: ASHRAE Transactions. 111 PART 2, p. 299-305 7 p., 4813.

  Research output: Contribution to journal › Conference Article › peer-review

  • Air Jet 100%
  • Human Exposure to Pollutant 100%
  • Exhalation 66%
  • Associated Health Risks 66%
  • Localized Turbulence 66%
  29 Scopus citations

• Performance of air cleaners for removing multiple volatile organic compounds in indoor air

  Chen, W., Zhang, J. S. & Zhang, Z., 2005, In: ASHRAE Transactions. 111 PART 1, p. 1101-1114 14 p., OR-05-17-2.

  Research output: Contribution to journal › Conference Article › peer-review

  • Indoor Air 100%
  • Air Cleaners 100%
  • Test Result 66%
  • Stainless Steel 33%
  • Gas-Phase 33%
  149 Scopus citations

• Product information exchange using open assembly model: Issues related to representation of geometry information

  Baysal, M. M., Roy, U., Sudarsan, R., Sriram, R. D. & Lyons, K. W., 2005, American Society of Mechanical Engineers, Manufacturing Engineering Division, MED. p. 601-609 9 p. (American Society of Mechanical Engineers, Manufacturing Engineering Division, MED; vol. 16-1).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Product Information Exchange 100%
  • Assembly Model 100%
  • Geometry Information 100%
  • Information Product 100%
  • XML 80%
  7 Scopus citations

• Surface parameterization of 3D configurations via quilts

  Dannenhoffer, J. F. & Haimest, R., 2005, 17th AIAA Computational Fluid Dynamics Conference. (17th AIAA Computational Fluid Dynamics Conference).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Surface Parameterization 100%
  • 3D Configuration 100%
  • Quilt 100%
  • Boundary Representation 100%
  • Computer-Aided Design System 66%

• The evolution of the most energetic modes in a high subsonic Mach number turbulent jet

  Tinney, C. E., Glauser, M. N. & Ukeiley, L. S., 2005, p. 12587-12600. 14 p.

  Research output: Contribution to conference › Paper › peer-review

  • POD Decomposition 100%
  • Cross-plane 100%
  • Relative Distribution 100%
  • Compressible Turbulent Mixing 100%
  • Axisymmetric Mixing Layer 100%
  23 Scopus citations

• Two perspectives on a cross-university Collaborative Engineering Design course

  Dannenhoffer, J. F. & Cottrell, J. M., 2005, p. 15405-15414. 10 p.

  Research output: Contribution to conference › Paper › peer-review

  • Collaborative Engineering 100%
  • collaborative design 100%
  • Design Engineering 100%
  • Infrastructure 50%
  • Aerospace Vehicle 50%
  1 Scopus citations

• Use of low-dimensional methods for wake flowfield estimation from dynamic strain

  Schmit, R. F. & Glauser, M. N., May 2005, In: AIAA journal. 43, 5, p. 1133-1136 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Dynamic Strain 100%
  • Dimensional Method 100%
  • Dynamic Strain Measurement 33%
  • Mean Flow Field 33%
  • Wingtip Vortex 33%
  12 Scopus citations

• Work in progress - A collaborative ERP configuration project: Preparing engineering students for the global economy

  Moon, Y. B., Chaparro, T. S. & Heras, A. D., 2005, Proceedings - Frontiers in Education, 35th Annual Conference: Pedagogies and Technologies for the Emerging Global Economy, FIE'05. p. T4D-18-T4D-19 1611972. (Proceedings - Frontiers in Education Conference, FIE; vol. 2005).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Collaborative Enterprise 100%
  • Engineering Student 100%
  • Planning Methods 66%
  • Industry Scale 33%
  • Professional Skills 33%
  2 Scopus citations
• 2006

  A model for capturing product assembly information

  Rachuri, S., Han, Y. H., Foufou, S., Feng, S. C., Roy, U., Wang, F., Sriram, R. D. & Lyons, K. W., Mar 2006, In: Journal of Computing and Information Science in Engineering. 6, 1, p. 11-21 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Product Assembly Information 100%
  • Assembly Information 100%
  • Engineering Analysis 12%
  • Class Structure 12%
  • Core Product 12%
  81 Scopus citations

• An extendible material database for Indoor Air Quality and hygrothermal research and applications

  Nicolai, A. & Zhang, J. S., 2006, Proceedings of the 3rd International Building Physics Conference - Research in Building Physics and Building Engineering. p. 49-54 6 p. (Proceedings of the 3rd International Building Physics Conference - Research in Building Physics and Building Engineering).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Materials Database 100%
  • Hygrothermal Effect 100%
  • Simulation Tool 100%
  • Material Database 100%
  • Database Producers 33%
  1 Scopus citations

• A non-classical, energy release rate based approach for predicting delamination growth in graphite reinforced laminated polymeric composites

  Davidson, B. D., Bialaszewski, R. D. & Sainath, S. S., Aug 2006, In: Composites Science and Technology. 66, 10, p. 1479-1496 18 p.

  Research output: Contribution to journal › Article › peer-review

  • Polymeric Composite 100%
  • Polymeric Matrix Composite 50%
  • Toughened Epoxy 50%
  • Polymeric Matrix Composites 50%
  • Classical Method 25%
  39 Scopus citations

• A scheme for mapping tolerance specifications to generalized deviation space for use in tolerance synthesis and analysis

  Wang, H., Pramanik, N., Roy, U., Sudarsan, R., Sriram, R. D. & Lyons, K. W., 2006, In: IEEE Transactions on Automation Science and Engineering. 3, 1, p. 81-90 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Generalized Deviation 100%
  • Material Condition 100%
  • Least Material 40%
  • Maximum Material Condition 22%
  • Bounded Region 20%
  17 Scopus citations

• A study of air, water and VOC transport through building materials with the deal chamber system

  Salonvaara, M. H., Yang, M. & Zhang, J. S., 2006, Proceedings of the A and WMA Indoor Environmental Quality: Problems, Research and Solutions Conference 2006. p. 670-682 13 p. (Proceedings of the A and WMA Indoor Environmental Quality: Problems, Research and Solutions Conference 2006; vol. 2).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Sorption 100%
  • Diffusion 100%
  • Detailed Material 33%
  • Gypsum Board 33%
  • State Condition 33%
  4 Scopus citations

• A time-resolved estimate of the turbulence and source mechanisms in a subsonic jet flow

  Tinney, C. E., Jordan, P., Delville, J., Hall, A. M. & Glauser, M. N., 2006, Collection of Technical Papers - 44th AIAA Aerospace Sciences Meeting. American Institute of Aeronautics and Astronautics Inc., p. 7414-7426 13 p. (Collection of Technical Papers - 44th AIAA Aerospace Sciences Meeting; vol. 10).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Turbulence Mechanism 100%
  • Sound Source 100%
  • Poitiers 33%
  • Volume Reconstruction 33%
  8 Scopus citations

• Bending and buckling of a class of nonlinear fiber composite rods

  Levy, A. J., Shukla, A. & Xie, M., May 2006, In: Journal of the Mechanics and Physics of Solids. 54, 5, p. 1064-1092 29 p.

  Research output: Contribution to journal › Article › peer-review

  • Composite Rod 100%
  • Imperfection 100%
  • Interface Parameters 66%
  • Fiber Slip 66%
  • Ultramicrotomy 33%
  3 Scopus citations

• CFD analysis of unsteady aerodynamics of airfoils for rotor applications

  Dumlupinar, E. & Murthy, V. R., 2006, Collection of Technical Papers - 36th AIAA Fluid Dynamics Conference. American Institute of Aeronautics and Astronautics Inc., p. 1296-1305 10 p. (Collection of Technical Papers - 36th AIAA Fluid Dynamics Conference; vol. 2).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Airfoil Aerodynamics 100%
  • Unsteady Aerodynamics 100%
  • Edge Contour 33%
  • High-lift 33%
  • Unsteady Flow Field 33%
  3 Scopus citations

• Computation of occupant exposure in an office cubicle

  Khalifa, H. E., Prescod, S. J., Dannenhoffer, J. F. & Elhadidi, B., 2006, Proceedings of the A and WMA Indoor Environmental Quality: Problems, Research and Solutions Conference 2006. p. 904-917 14 p. (Proceedings of the A and WMA Indoor Environmental Quality: Problems, Research and Solutions Conference 2006; vol. 2).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Spatial Uniformity 100%
  • Zonal Model 100%
  • Occupied Space 62%
  • Single High 62%
  • Exposure Estimation 50%
  3 Scopus citations

• Definition of standard office environments for evaluating the impact of office furniture emissions on indoor VOC concentrations

  Carter, R. D. & Zhang, J. S., 2006, Proceedings of the A and WMA Indoor Environmental Quality: Problems, Research and Solutions Conference 2006. p. 639-658 20 p. (Proceedings of the A and WMA Indoor Environmental Quality: Problems, Research and Solutions Conference 2006; vol. 2).

  Research output: Chapter in Book/Entry/Poem › Conference contribution

  • Office Furniture 100%
  • Workstation 100%
  • Indoor VOCs 100%
  • VOC Concentration 100%
  • Outdoor Air 66%
  2 Scopus citations